On Windows, you can see if the camera connects when you plug it in, since Windows always pops up a message for new devices. If you are on a Mac, use “Image Capture”, which is an application that comes with the computer and is located in the “Applications” folder. Then you will want to verify that the computer itself can see the camera. Or set the lens to the desired zoom for the shot, and turn the camera off and on.įirst, make sure your camera is supported by visiting the Camera Support page, taking care to note which versions of Dragonframe support the camera (if any). Changing the zoom affects the focus range. This feature does not work on a shot that also zooms. Dragonframe can program the focus if you create an axis in ARC and set the Connection to ‘Digital Focus’. Then verify that when you take a picture it does not open and close.įocus Programming: This also requires an RF lens and Dragonframe 5. Verify that it is closed during live view. You can verify by choosing a fairly closed aperture, like f/22, and looking into the lens. The feature is always on in Dragonframe 5.

This prevents potential flicker from the aperture opening and closing repeatedly. You must use an RF lens and set it to ‘MF’.Īperture Lock: The camera keeps the lens closed during video assist and while capturing photos. A USB Type-C port powers the adapter and devices can be connected using the included 3.5mm cable or RJ45 cable for wired connections or wirelessly paired.HD Live View: The live view (video assist) is doubled from 960×640 to 1920×1280.įocus Peaking: The camera shows which parts of the image are in focus with bright colored pixels.

Multiple adapters can be connected to the same computer with different web app controls running at the same time to make solo production a breeze.

The adapter can be connected to a single motion control unit or bundled together. A focus control knob on the adapter allows for manual focus, while further control over your linked devices can be achieved using the edelkrone web application for simultaneous control over a single device. The Link Adapter connects motion-controlled jibs, dollies, heads, and sliders to separately available Dragonframe software on a personal computer for seamless recording and accurate adjustment with support for shoot-move-shoot functionality. Achieve crisp and accurate footage for your stop-motion project thanks to the control capabilities of the Link Adapter from edelkrone.

Edelkrone dragonframe